Custom recovery for Tecno Camon C8

The Tecno Camon C8 custom recovery ported by team Hovatek is finally here, be the first to install, this custom recovery would render you an administrative usage over your device like, letting you flash custom roms easily, stock roms and other related options, then rooting follows.




In this guide, I would walk you through the process on how to install TWRP Recovery on Tecno Camon C8 device.

Requirements:
-          SP Flash tools (Download)
-          Recovery Image (Download)
-          USB cable for communicating the Tecno Camon C8 device with your PC.

How to Install TWRP Recovery on Tecno Camon C8

Step 1: First download the recovery zip file from here, and then extract the “Recovery.img” and “MT6735_Android_Scatter.txt” file to the desktop screen of your computer.

Step 2: After that, download Tecno USB drivers, and install on your PC.

Step 3: Now, power off your device, and remove the battery.

Step 4: Next, download the SP Flash tool here, and extract the files to your computer. You should get the following files as seen below, after extraction.

Step 5: From the extracted files, open Flash_tool.exe

Step 6: Once the flash tool is launched, then click on the download/upgrade tab and click on scatter loading button

Step 7: Now, locate the “MT6735_Android_Scatter.txt” file, which is on your desktop.

Step 8: After that, click download to begin flashing process.

Step 9: Immediately, connect your device (without battery) to your computer via USB cable, and press Volume Down or up key, so it would be detected easily by your computer.

Step 10: The Flashing process would be in progress, and a Green button would appear once the process is completed.

Now that TWRP Recovery is installed on your device, next is rooting your device. Simply couple your device back and power it on.

How to Root Tecno Camon C8

1.       Firstly, download SuperSU from here and move to the internal memory of your device.

2.       Now, boot your Tecno Camon device to recovery mode. Simply press and hold Volume Down and Power buttons.

3.       After that, from recovery menu, click on install and locate the SuperSU zipped file you transferred to the internal memory of your device, and then install it.

4.       Once you’ve successfully flashed both files, then go back to recovery menu and reboot your device.

Read also:
  How to root any sturborn phone with the latest kingroot v9.5

That’s it. Your device will reboot and the root process would be completed. You can verify root by using root checker. Hope this helps? If you encounter any difficulty, feel free to let me know via comment section.

Credits goes to Team HovaTek.

Sharing Is Caring

You May Also Like

Previous
Next Post »