Full Guide On How To Unbrick a Bricked Tecno W4

 Hello Tecno y4 users, this is a full guide on how to unblock your Tecno y4 Android smartphone to normal using a stock rom/firmware

The Tecno W4 Android smartphone  was popularly known to be the first Tecno device to run 6.0 Marshmallow operating system out of box. The smartphone also features 1GB Ram and 16GB expandable internal memory with 8mp rear camera and 5 inches high definition screen.
Tecno W4 unbrick
Tecno W4 

The Tecno W4 Android smartphone has been on sales few months ago but you're still wondering if you can get the phone here is the Tecno y4 specifications

   This is an essential guide on how to unbrick a bricked Tecno w4 smartphone using the official Android 6.0 Marshmallow stock firmware. Continue with guide below to put live to your brick Tecno W4 Android smartphone.


REQUIREMENT TO UNBRICK YOUR TECNO W4
◾SP Flash tools (Download)
◾Tecno W4 Stock ROM (Download)
◾USB cable for communicating the device with your PC.

Recommend download; All Tecno stock roms/firmwares

Steps On How to Flash Tecno W4 to Stock Android 6.0 Firmware.

Step 1: First download the Stock ROM file from the link provided above, and then extract the “Tecno W4 stock firmware” folder to the desktop screen of your computer.

Step 2: Now, power off your Tecno W4 device (if it’s a bricked device simply hold the power button to power off).
Step 3: Next, download the SP Flash tool, and extract the files to your computer. You should get the following files as seen below, after extraction.


Step 4: From the extracted files, open Flash_tool.exe

Step 5: Once the flash tool is launched, then click on the download/upgrade tab and click on scatter loading button.


Step 6: Now, locate the “MT6580_Android_Scatter.txt” file, which is on your desktop, also endeavor to click on the “Format All + Download” option just as circled in the image below.




Step 7: After that, click download to begin flashing process, as circled in the image below.

Step 8: Immediately, connect your device to your computer via USB cable, and press Volume Down or up key, so it would be detected easily by your computer.

Step 9: The Flashing process would be in progress, and a Green button would appear once the process is completed.

Completed!!! 


This is how to unbrick and flash stock rom on Tecno W4 Android smartphone, if you encounter any problems doing this always use of comments box below.

Sharing Is Caring

You May Also Like

Previous
Next Post »

5 comments

comments
18 December 2016 at 20:30 delete

Got a corrupt display after flashing

Reply
avatar
3 January 2017 at 10:06 delete

download was complete but the problem is no network even after restore IMEI

Reply
avatar
11 June 2017 at 06:07 delete

I have a tecno W3 but it wont turn on when I try to, but somtimes its turn on or off for its self.... Can u help me out please!

Reply
avatar
12 June 2017 at 19:23 delete

Try flashing another rom on it, if problem persists, take it to Tecno carlcare center near you.

Reply
avatar